Re-pairing the Bluetooth connection is usually only required if Smooth scrolling is not initialized, which can happen if you wake up your computer from sleep.
In case the re-pairing process fails, use Restart device driver from the Driver menu instead. You can configure the default action in the Bluetooth driver settings.
Prerequisites
Re-pairing works only if the Magic Mouse has an active Bluetooth connection established.
The Magic Utilities can't re-pair a Magic Mouse automatically which is turned off or was paired to another computer in the meantime.
The re-pairing process
The process consists of three automatic steps.
- Remove the paired Bluetooth device.
- Pair the Magic Mouse again as a Bluetooth device.
- Wait until the Magic Mouse becomes active.
During this time, a wait dialog indicates the individual steps.
If one step fails, the remaining steps cannot be completed automatically.
Re-pair the Magic Mouse manually
In case Remove or Pair fail, you have to complete the remaining steps manually.
Remove the Magic Mouses from Windows devices
Windows 11
- Open Windows Settings > Bluetooth & devices > View more devices.
- At your listed Magic Mouse, click on the three-dot menu.
- Click Remove device.
- Wait about 10 seconds until Windows has removed the Magic Mouse.
Windows 10
- Open Windows Settings > Devices.
- Click on your listed Magic Mouse.
- Click Remove device and confirm with Yes.
- Wait about 10 seconds until Windows has removed the Magic Mouse.
Pair as a Bluetooth device
For full instructions on Bluetooth pairing, click here.
Wait until the Magic Mouse becomes active
The waiting time on manual repairing is usually negligible and takes only a few seconds.